Use this cutter to speed up your badge production.
These Desktop Cutters are of fixed size, but will prepare consistent, fast, high quality artwork for the production of 25 x 70 mm badges.
There is no blade to replace and these units handle multiple sheets of 80gsm paper or single heavier (400g) photographic paper, cutting clean, consistent edges.
Desktop cutters are quicker as you can see what you are cutting, it’s a bit like looking through a ships porthole, just move the paper around until it’s aligned, and pull the lever.
Now, the good and the bad; You have to cut your A4 paper into two strips, or print on narrow strips, most printers will print on narrow paper. You CAN cut more than one strip at a time, so if you have for example, four sheets with the artwork in the same place (they should be if they came from the same printer) just slide them in and cut!
Note; this cutter cuts 80.6 by 35.6 mm rectangles (with rounded corners) , the correct size for Alond 25mm x 70mm badges.
The precision-ground steel blade stays sharp.
As we have mentioned before, desktop circle cutters can speed up your badge production significantly!
- Additional Information
SKU 131 EAN 0793588729110
Customer Reviews 1 item(s)
- Temporary Review Placeholder
Temporary Review Placeholder (Google penalises product pages without a review. This placeholder will be removed when a customer review is written for this Alond badge related product).
How are we doing? Quality