Desktop Circle Cutter 75mm

More Views

Videos available below

  • Badge artwork 3 x 100gsm paper sheets being cut on a similar circle cutter see below;

  • Desktop Circle Cutter 75mm

    Availability: In stock

    Only 3 left



    Use this cutter to speed up your badge making.

    These badge Desktop Circle Cutters are of fixed size, they only cut one size, but will prepare consistent, fast,  paper, parchment or fabric (some fabrics) circles for the production of 75mm badges (cuting an 86mm circle).

    There is no blade to replace and no sharpening required. These units handle multiple sheets of heavier paper or photographic paper, cutting clean and consistent edges.

    The precision-ground steel blade stays sharp.

    Desktop cutters are quicker as you can see what you are cutting, it’s a bit like looking through a ships porthole, just move the paper around until it’s aligned, and pull the lever, if you have more than one sheet of paper loaded you can cut multiple circles at one time.

    You will have to cut your A4 paper into strips, or print on narrow strips, most printers will print on narrow paper. You CAN cut more than one strip at a time, so if you have for example, four sheets with the artwork in the same place (they should be if they came from the same printer) just slide them in and cut!

    Both the hand held and desk top cutters need you to cut the paper into strips, this is their slight disadvantage, however because they are fixed size cutters they are always ready to cut exactly the correct size with (most importantly) a single action, rotating cutters always need multiple repositioning of your hands in order to complete a cut.

    The desktop cutter also has the advantage of being able to cut two or three sheets at the same time, so if the artwork comes out of the same printer it should be in exactly the same position.

    The added advantage of the desktop cutter is that (with a bit of effort) you can bolt it down to a worktop and quickly slide paper through and pull the handle down without needing to steady or brace the cutter.

    Note; this cutter cuts 86mm circles, the correct size for Alond 75mm badges.

    Additional Information

    Additional Information

    SKU 126
    EAN 0793588728717

    Customer Reviews 1 item(s)

    Temporary Review Placeholder
    Temporary Review Placeholder (Google penalises product pages without a review. This placeholder will be removed when a customer review is written for this Alond badge related product).
    How are we doing?
    Review by Temporary Review Placeholder / (Posted on 29/10/2019)