3.: Help your school fundraising, see our fundraising badge kits. 4. Afterpay, buy your badge equipment in 4 instalments
Details
All our badges come with MylarMylar is often used to generically refer to polyester film or plastic sheet. However, it is a registered trademark owned by Dupont Tejjin Films for a specific family of plastic sheet products made from the resin Polyethylene Terephthalate (PET)., these are some spares if you want extra.
Sometimes, a badge is not completed correctly, some parts can be reused, but, the dome and mylar cannot, so these (and the domes) are supplied as extras.
MylarMylar is often used to generically refer to polyester film or plastic sheet. However, it is a registered trademark owned by Dupont Tejjin Films for a specific family of plastic sheet products made from the resin Polyethylene Terephthalate (PET)., normally part of our badge making paraphenalia, offered here as we were asked a number of times,
"Can you supply those clear plastic disks only"?
Note that these fit the Badge It™ 30mm and are actually; 44mm diameter
Important; if you do not use Alond Badge It™ 30mm compatible badge components please measure your MylarMylar is often used to generically refer to polyester film or plastic sheet. However, it is a registered trademark owned by Dupont Tejjin Films for a specific family of plastic sheet products made from the resin Polyethylene Terephthalate (PET). carefully to make sure it is EXACTLY 44mm
The reason we carry MylarMylar is often used to generically refer to polyester film or plastic sheet. However, it is a registered trademark owned by Dupont Tejjin Films for a specific family of plastic sheet products made from the resin Polyethylene Terephthalate (PET). & Domes is that both of these items are deformed during the badge making process, if the badge is taken apart the back can be reclaimed and reused, but domes and MylarMylar is often used to generically refer to polyester film or plastic sheet. However, it is a registered trademark owned by Dupont Tejjin Films for a specific family of plastic sheet products made from the resin Polyethylene Terephthalate (PET). need to be replaced.
Messages:
1.: Eyelet makers? Yes, we have them. 2. Our Badge FAQ page answers many questions, see link below.
3.: Help your school fundraising, see our fundraising badge kits. 4. Afterpay, buy your badge equipment in 4 instalments
3.: Help your school fundraising, see our fundraising badge kits. 4. Afterpay, buy your badge equipment in 4 instalments
Additional Information
| EAN | 0793588730512 |
|---|
Write Your Own Review
Estimate Shipping
Enter your destination to get a shipping estimate.
Related Products
-
Badge It™ 30mm Hand held Circle Cutter
stock is due; Early November
-
Badge It™ refill pack of 100 compatible 30mm badge components
-
30mm Badge It™ Badge Magnet add-on (pack of 100)
stock is due; Early November
Recycle
The plastic in this product is ABS, a fully recyclable plastic.
Any steel or any Mylar, also can be recycled (Mylar is PET)
%20%0A%0A<p><strong>All our badges come with Mylar</strong>, these are some spares if you want extra.</p>
<p>Sometimes, a badge is not completed correctly, some parts can be reused, but, the dome and mylar cannot, so these (and the domes) are supplied as extras.</p>
<p>Mylar, normally part of our badge making paraphenalia, offered here as we were asked a number of times,</p>
<p>"Can you supply those clear plastic disks only"?</p>
<p>Note that these fit the Badge It™ 30mm and are actually; <strong>44mm diameter</strong></p>
<p><strong><span style="color: #ff0000;">Important; if you do not use Alond Badge It™ 30mm compatible badge components please measure your Mylar carefully to make sure it is EXACTLY 44mm</span></strong></p>
<p>The reason we carry Mylar & Domes is that both of these items are deformed during the badge making process, if the badge is taken apart the back can be reclaimed and reused, but domes and Mylar need to be replaced.</p>){kind=link}