Desktop Circle Cutter 25mm

For the professional, higher volume badge producer. These Desktop Circle Cutters are of fixed size, but will prepare consistent, high quality artwork for the production of 25mm badges. Desktop cutters are quicker as you can see what you are cutting, it’s a bit like a ships porthole, just move the paper around until it’s aligned, and pull the lever. Now the good and the bad; You have to cut your A4 paper into strips, or print on narrow strips, most printers will print on narrow paper. You CAN cut more than one strip at a time, so if you have for example, four sheets with the artwork in the same place (they should be if they came from the same printer) just slide them in and cut! There is no blade to replace and these units handle multiple sheets of heavier (200g) paper, cutting clean, consistent edges. Testing of these 25mm cutters shows that it will not reliably cut Mylar or fabric. Note; this cutter cuts 35mm circles, the correct size for Alond 25mm badges.