Desktop Circle Cutter 75mm

Use this cutter to speed up your badge making.

These badge Desktop Circle Cutters are of fixed size, they only cut one size, but will prepare consistent, fast,  paper, parchment or fabric (some fabrics) circles for the production of 75mm badges (cuting an 86mm circle).

There is no blade to replace and no sharpening required. These units handle multiple sheets of heavier paper or photographic paper, cutting clean and consistent edges.

Desktop cutters are quicker as you can see what you are cutting, it’s a bit like looking through a ships porthole, just move the paper around until it’s aligned, and pull the lever, if you have more than one sheet of paper loaded you can cut multiple circles at one time.

You will have to cut your A4 paper into strips, or print on narrow strips, most printers will print on narrow paper. You CAN cut more than one strip at a time, so if you have for example, four sheets with the artwork in the same place (they should be if they came from the same printer) just slide them in and cut!

Note; this cutter cuts 86mm circles, the correct size for Alond 75mm badges.